Copyright © 1995-2024 Michael P. Murray & Mike's Clock Clinic
Mike Murray Memberships: NAWCC
P. O. Box 562
1151 D Street
Fossil, OR 97830-0562
The P.O. Box is for the USPS only and should be removed for all other carriers.
Please do NOT call or E-mail unless you have read this entire Web page
E-mail address: Mike@telechron.us (Preferred contact method)
36 Tooth Pinion for Most "B" Chiming Clocks
All checks must be made out to Mike Murray because I gave up my business checking.
Most Herschede, Revere, & Telechron chiming clocks take the "B" rotor
and attached to that rotor is a 36 tooth pinion. These pinions are lost at a
far too great of a rate. I have a small stock of these pinions, which are
guaranteed to be an exact replacement or your purchase price will be refunded to you
upon the pinion's return.
All 36 tooth pinions cost $75.00 plus $20.00 priority mail (Canada is $45.00)
and are guaranteed to fit and work properly, which brings your total cost to $95.00.
If you send the entire clock or mechanism, then the turn around is 6 to 8 months.
I'll not ship the rotor until I received payment. I accept personal checks,
certified checks, or company checks for payment but repeat customers may use
personal checks. Normally shipping takes place one week or so after I receive
payment and thanks! If you use a personal check then please allow 10 days
before shipping to allow the check to clear.
For return shipping I use USPS for all shipping. If you want
to use another carrier then you will have to arrange everything for shipping,
meaning I hand the box to the driver, get a receipt and nothing else.
All checks must be made out to Mike Murray because I gave up my business checking.
I would like payment by money order, certified check, personal check,
business check, or through Pay Pal or Square, which is the only way I take
credit cards. I do prefer a check over Pay Pal or Square because Pay Pal and
Square take 3%.
The 3% is added to the total bill if you use a credit card.
With either Pay Pal or Square, I will send an invoice to your E-mail
address. Here you are dealing directly with either service and not me.
You do not have to be a member of Pay Pal or Square in order to issue a payment but
the 3% will be added to your total bill.
All of the added fees are exactly what either service charges me for taking your
credit card.
My main Web site is located at http://www.atmosman.com/
Main FTP site is located at http://home.earthlink.net/~atmosman/earthpdf.html
Respectfully,
Michael P. Murray
Memberships Include:
National Association of Watch & Clock Collectors
An Internet private E-mailing list called Clocksmiths
N.A.W.C.C. National 400-day Clock Chapter # 168
A service from, E-mail address: Mike@telechron.us
Mike Murray Founder of Clocksmiths
A specialist in Atmos and 400-day clock repair.
Also, I overhaul most plug in electric clocks.
In continuous service since 04/01/1982.
Mike's Clock Clinic Memberships: Clocksmiths & NAWCC
P. O. Box 562
1151 D Street
Fossil, OR 97830-0562
Phone: 541-370-2440
My main Web site is located at http://www.atmosman.com/
Main FTP site is located at http://www.atmosman.com/earthpdf.html
Memberships: Clocksmiths & NAWCC
N.A.W.C.C. International 400-day Clock Chapter # 168
Published in Chapter 168's "Torsion Times"
Published in AWCI's "Horological Times"
Formally AWCI's 400-day (Anniversary) clock Bench Course Instructor!
Please do NOT call or E-mail unless you have read this entire Web page
E-mail address: Mike@telechron.us (Preferred contact method)
All checks must be made out to Mike Murray because I gave up my business checking. Most Herschede, Revere, & Telechron chiming clocks take the "B" rotor and attached to that rotor is a 36 tooth pinion. These pinions are lost at a far too great of a rate. I have a small stock of these pinions, which are guaranteed to be an exact replacement or your purchase price will be refunded to you upon the pinion's return. All 36 tooth pinions cost $75.00 plus $20.00 priority mail (Canada is $45.00) and are guaranteed to fit and work properly, which brings your total cost to $95.00. If you send the entire clock or mechanism, then the turn around is 6 to 8 months. I'll not ship the rotor until I received payment. I accept personal checks, certified checks, or company checks for payment but repeat customers may use personal checks. Normally shipping takes place one week or so after I receive payment and thanks! If you use a personal check then please allow 10 days before shipping to allow the check to clear.
For return shipping I use USPS for all shipping. If you want to use another carrier then you will have to arrange everything for shipping, meaning I hand the box to the driver, get a receipt and nothing else.
All checks must be made out to Mike Murray because I gave up my business checking. I would like payment by money order, certified check, personal check, business check, or through Pay Pal or Square, which is the only way I take credit cards. I do prefer a check over Pay Pal or Square because Pay Pal and Square take 3%. The 3% is added to the total bill if you use a credit card. With either Pay Pal or Square, I will send an invoice to your E-mail address. Here you are dealing directly with either service and not me. You do not have to be a member of Pay Pal or Square in order to issue a payment but the 3% will be added to your total bill. All of the added fees are exactly what either service charges me for taking your credit card.
My main Web site is located at http://www.atmosman.com/ Main FTP site is located at http://home.earthlink.net/~atmosman/earthpdf.html