Copyright © 1995-2024 Michael P. Murray & Mike's Clock Clinic
Mike Murray Memberships: NAWCC
P. O. Box 562
1151 D Street
Fossil, OR 97830-0562
The P.O. Box is for the USPS only and should be removed for all other carriers.
Please do NOT call or E-mail unless you have read this entire Web page
E-mail address: Mike@telechron.us (Preferred contact method)
Telechron "BC-3" M-3583 60 RPM Clock Rotors
at a special price on Aluminum New Old Stock (never used).
This is for the rotor only.
I have a limited supply of NOS (new old stock) aluminum "BC-3s".
I'm giving my standard 2-year warranty. The "BC-3" rotors
are $250.00 each plus $20.00 priority mail (Canada is $45.00).
If you order more than one, the shipping stays the same as above.
All checks must be made out to Mike Murray because I gave up my business checking.
This is for the rotor only
Here's what I have in aluminum NOS.
"BC-3" M-3583
23 (In stock)
Once these are gone, they are gone. These have not been manufactured since
the 1980's and all the equipment for their construction was sold for scrap.
If you have your old 60 RPM rotor, I can rebuild that for $170.00,
which includes return shipping and the same 2-year warranty. This takes
4 to 6 weeks and requires payment is send with the rotor.
Please see: Rebuilding a 60 RPM rotor.
If you need the complete motor (rotor, field and coil) then please see:
http://www.telechron.us/special3.html The cost is $450.00 each plus shipping.
Like all aluminum rotors these will make some noise but that will not
interfere with their operation. Because of their age any oil or grease
the Telechron may have used is now congealed. If you can wait 4 to 6
weeks, I will open the rotor and clean the internal gears and plates and
flush out all old lubricant then lubricate with high quality synthetic,
which should bring down the noise some. I highly recommend this but
then it becomes a repair and will add at least 4 to 6 weeks. I must be
paid before I take the time and do this.
The drive end of the rotor (output shaft) can have many different and
removable pinions (gears). You must save and reuse that pinion and please
don't assume that the 15 tooth pinion I have will work for your application.
I have more of the pinion-less rotors than the rotors with pinions.
Please order the pinion-less rotors first because you can always remove the
pinion from your existing rotor and transfer it over. All pinion are attached
via a set screw and are either 12 or 15 toothed. I only have The 15 tooth
pinion.
For return shipping I use USPS for all shipping. If you want
to use another carrier then you will have to arrange everything for shipping,
meaning I hand the box to the driver, get a receipt and nothing else.
All checks must be made out to Mike Murray because I gave up my
business checking.
I would like payment by, certified check, personal check, business check,
or through Pay Pal or Square, which is the only way I take credit cards. I
do prefer a check over Pay Pal or Square because Pay Pal and Square take 3%.
The 3% is added to the total bill if you use a credit card.
With either Pay Pal or Square, I will send an invoice to your E-mail
address. Here you are dealing directly with either service and not me.
You do not have to be a member of Pay Pal or Square in order to issue
a payment but the 3% will be added to your total bill.
All of the added fees are exactly what either service charges me
for taking your credit card.
My main Web site is located at http://www.atmosman.com/
Main FTP site is located at http://www.atmosman.com/earthpdf.html
Respectfully,
Michael P. Murray
Memberships Include:
National Association of Watch & Clock Collectors
An Internet private E-mailing list called Clocksmiths
N.A.W.C.C. National 400-day Clock Chapter # 168
A service from, E-mail address: Mike@telechron.us
Mike Murray Founder of Clocksmiths
A specialist in Atmos and 400-day clock repair.
Also, I overhaul most plug in electric clocks.
In continuous service since 04/01/1982.
Mike's Clock Clinic Memberships: Clocksmiths & NAWCC
P. O. Box 562
1151 D Street
Fossil, OR 97830-0562
Phone: 541-370-2440
My main Web site is located at http://www.atmosman.com/
Main FTP site is located at http://www.atmosman.com/earthpdf.html
Memberships: Clocksmiths; NAWCC
N.A.W.C.C. International 400-day Clock Chapter # 168
Published in Chapter 168's "Torsion Times"
Published in AWCI's "Horological Times"
Formally AWCI's 400-day (Anniversary) clock Bench Course Instructor!
Back to Mike's Clock Clinic's Telechron Web Page
Copyright © 1995-2024 Michael P. Murray & Mike's Clock Clinic
Back to the top of this page
Created in December of 1995 and last updated January 02, 2024.
Please do NOT call or E-mail unless you have read this entire Web page
E-mail address: Mike@telechron.us (Preferred contact method)Telechron "BC-3" M-3583 60 RPM Clock Rotors at a special price on Aluminum New Old Stock (never used).
This is for the rotor only.
I have a limited supply of NOS (new old stock) aluminum "BC-3s".
I'm giving my standard 2-year warranty. The "BC-3" rotors
are $250.00 each plus $20.00 priority mail (Canada is $45.00).
If you order more than one, the shipping stays the same as above.
All checks must be made out to Mike Murray because I gave up my business checking.
This is for the rotor only
Here's what I have in aluminum NOS.
| "BC-3" M-3583 |
| 23 (In stock) |
Once these are gone, they are gone. These have not been manufactured since the 1980's and all the equipment for their construction was sold for scrap.
If you have your old 60 RPM rotor, I can rebuild that for $170.00, which includes return shipping and the same 2-year warranty. This takes 4 to 6 weeks and requires payment is send with the rotor. Please see: Rebuilding a 60 RPM rotor.
If you need the complete motor (rotor, field and coil) then please see: http://www.telechron.us/special3.html The cost is $450.00 each plus shipping.
Like all aluminum rotors these will make some noise but that will not interfere with their operation. Because of their age any oil or grease the Telechron may have used is now congealed. If you can wait 4 to 6 weeks, I will open the rotor and clean the internal gears and plates and flush out all old lubricant then lubricate with high quality synthetic, which should bring down the noise some. I highly recommend this but then it becomes a repair and will add at least 4 to 6 weeks. I must be paid before I take the time and do this.
The drive end of the rotor (output shaft) can have many different and removable pinions (gears). You must save and reuse that pinion and please don't assume that the 15 tooth pinion I have will work for your application.
I have more of the pinion-less rotors than the rotors with pinions. Please order the pinion-less rotors first because you can always remove the pinion from your existing rotor and transfer it over. All pinion are attached via a set screw and are either 12 or 15 toothed. I only have The 15 tooth pinion.
For return shipping I use USPS for all shipping. If you want to use another carrier then you will have to arrange everything for shipping, meaning I hand the box to the driver, get a receipt and nothing else.
All checks must be made out to Mike Murray because I gave up my business checking. I would like payment by, certified check, personal check, business check, or through Pay Pal or Square, which is the only way I take credit cards. I do prefer a check over Pay Pal or Square because Pay Pal and Square take 3%. The 3% is added to the total bill if you use a credit card. With either Pay Pal or Square, I will send an invoice to your E-mail address. Here you are dealing directly with either service and not me. You do not have to be a member of Pay Pal or Square in order to issue a payment but the 3% will be added to your total bill. All of the added fees are exactly what either service charges me for taking your credit card.
My main Web site is located at http://www.atmosman.com/ Main FTP site is located at http://www.atmosman.com/earthpdf.html Respectfully, Michael P. Murray Memberships Include: National Association of Watch & Clock Collectors An Internet private E-mailing list called Clocksmiths N.A.W.C.C. National 400-day Clock Chapter # 168 A service from, E-mail address: Mike@telechron.us Mike Murray Founder of Clocksmiths A specialist in Atmos and 400-day clock repair. Also, I overhaul most plug in electric clocks. In continuous service since 04/01/1982. Mike's Clock Clinic Memberships: Clocksmiths & NAWCC P. O. Box 562 1151 D Street Fossil, OR 97830-0562 Phone: 541-370-2440 My main Web site is located at http://www.atmosman.com/ Main FTP site is located at http://www.atmosman.com/earthpdf.html Memberships: Clocksmiths; NAWCC N.A.W.C.C. International 400-day Clock Chapter # 168 Published in Chapter 168's "Torsion Times" Published in AWCI's "Horological Times" Formally AWCI's 400-day (Anniversary) clock Bench Course Instructor!
Back to Mike's Clock Clinic's Telechron Web Page