Back to Mike's Clock Clinic's Telechron Rotor Web Page


Back to Mike's Clock Clinic's Telechron Web Page or  Back to Mike's Clock Clinic's Main Web Page

Mike's Telechron Clock Clinic's
Special on Aluminum New Old Stock (never used) 60 RPM Telechron
Chart Recorder and Clock Motors (M-3583) "BC-3", includes the field and coil.

Copyright © 1995-2017 Michael P. Murray & Mike's Clock Clinic Mike's Clock Clinic Memberships: NAWCC 1600 Maryland Avenue Myrtle Point, OR 97458-1508 Phone: 541-559-1090, or 877-286-6762 (Toll Free) E-mail address: Mike@telechron.us (Preferred contact method)
Special on Aluminum New Old Stock (never used) 60 RPM Telechron Chart Recorder and Clock Motors (M-3583) "BC-3", includes the field and coil.

I have a limited supply of NOS (new old stock) aluminum "BC-3s complete".  These include my standard 2-year warranty.  The "BC-3" motors are $450.00 each include the field and # 37 coil plus $15.00 priority mail (Canada is $40.00).  That's $465.00 ($490.00) each because of shipping weight.
Here's what I have in aluminum NOS.
  "BC-3"   M-3583  complete with field and # 37 coil and AC wires
        9  (In stock)


Once these are gone, they are gone. These were manufactured over 40 years ago and never put into service.

If you only need the rotor then please see: http://www.telechron.us/special2.html The cost is $250.00 each plus shipping.

Like all aluminum rotors these will make some noise but that will not interfere with their operation. Because of their age any oil or grease the Telechron may have used is now congealed. If you can wait 2 to 3 weeks, I will open the rotor and clean the internal gears and plates and flush out all old lubricant then lubricate with high quality synthetic, which should bring down the noise some. I highly recommend this but then it becomes a repair and will add at least 2 to 3 weeks.

I have more of the pinion-less rotors than the rotors with pinions. Please order the pinion-less rotors first because you can always remove the pinion from your existing rotor and transfer it over. All pinion are attached via a set screw and are either 12 or 15 toothed. I only have The 15 tooth pinion.

For return shipping I use USPS for all shipping. If you want to use another carrier then you will have to arrange everything for shipping, meaning I hand the box to the driver, get a receipt and nothing else.

I would like payment by money order, certified check, personal check, business check, or through Pay Pal or Square, which is the only way I take credit cards. I do prefer a check over Pay Pal or Square because Pay Pal and Square take 3%. I only take credit cards if you are in the USA or Canada. The 3% is added to the total bill if you use a credit card. With Pay Pal you can pay me directly using "friends and family" where you absorb all fees and I'm paid the full amount. There would be nothing added amount to the final fill if you absorb all fees. Here you log on to Pay Pal and send me the full amount of my bill, so there is no E-voice coming from me with this method and you will be charged all Pay Pal fees on top of my final bill. With either Pay Pal or Square, I will send an invoice to your E-mail address. Here you are dealing directly with either service and not me. You do have to be a member of Pay Pal in order to issue a payment but you may use Square without any membership or additional Square fees but the 3% will be added to your total bill as with Pay Pal. With Square, I can also take the credit card information which includes the number, expiration date and the last 3 or 4 #'s of the security code from the back of the card BUT that adds 3.5% to the final bill. I'd prefer to avoid this method but it is an option. All of the added fees are exactly what either service charges me for taking your credit card.

My main Web site is located at http://www.atmosman.com/ Main FTP site is located at http://home.earthlink.net/~atmosman/earthpdf.html
Respectfully, Michael P. Murray Memberships Include: National Association of Watch & Clock Collectors An Internet private E-mailing list called Clocksmiths N.A.W.C.C. National 400-day Clock Chapter # 168 A service from, E-mail address: Mike@telechron.us Mike Murray Founder of Clocksmiths A specialist in Atmos and 400-day clock repair. Also, I overhaul most plug in electric clocks. In continuous service since 04/01/1982. Mike's Clock Clinic Memberships: Clocksmiths & NAWCC 1600 Maryland Avenue Myrtle Point, OR 97458-1508 Phone: 541-559-1090, or 877-286-6762 (Toll free) My main Web site is located at http://www.atmosman.com/ Main FTP site is located at http://home.earthlink.net/~atmosman/earthpdf.html Memberships: Clocksmiths; NAWCC N.A.W.C.C. International 400-day Clock Chapter # 168 Published in Chapter 168's "Torsion Times" Published in AWCI's "Horological Times" Formally AWCI's 400-day (Anniversary) clock Bench Course Instructor!


Back to Mike's Clock Clinic's Telechron Web Page

This page has been accessed a grand total of

times

Copyright © 1995-2017 Michael P. Murray & Mike's Clock Clinic

Back to the top of this page

Created in December of 1995 and last updated January 02, 2017.